 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CM100DU-24H Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Dual IGBTMODTM U-Series Module 100 Amperes/1200 Volts N A D Q - (2 PLACES) P - NUTS (3 PLACES) E C2E1 E2 C1 E2 G2 CM F G H B G1 E1 F M K K J R C L Description: Powerex IGBTMODTM Modules are designed for use in switching applications. Each module consists of two IGBT Transistors in a halfbridge configuration with each transistor having a reverse-connected super-fast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. Features: Low Drive Power Low VCE(sat) Discrete Super-Fast Recovery Free-Wheel Diode Isolated Baseplate for Easy Heat Sinking Applications: AC Motor Control Motion/Servo Control UPS Welding Power Supplies Laser Power Supplies Ordering Information: Example: Select the complete module number you desire from the table - i.e. CM100DU-24H is a 1200V (VCES), 100 Ampere Dual IGBTMODTM Power Module. Type CM Current Rating Amperes 100 V CES Volts (x 50) 24 G2 E2 C2E1 E2 C1 E1 G1 Outline Drawing and Circuit Diagram Dimensions A B C D E F G H Inches 3.7 1.89 Millimeters 94.0 48.0 Dimensions J K L M N P Q R Inches 0.53 0.91 1.13 0.67 0.28 M5 0.26 Dia. 0.02 Millimeters 13.5 23.0 28.7 17.0 7.0 M5 6.5 Dia. 4.0 1.18 +0.04/-0.02 30.0 +1.0/-0.5 3.150.01 0.43 0.16 0.71 0.02 80.00.25 11.0 4.0 18.0 0.5 49 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM100DU-24H Dual IGBTMODTM U-Series Module 100 Amperes/1200 Volts Absolute Maximum Ratings, Tj = 25 C unless otherwise specified Ratings Junction Temperature Storage Temperature Collector-Emitter Voltage (G-E SHORT) Gate-Emitter Voltage (C-E SHORT) Collector Current (Tc = 25C) Peak Collector Current Emitter Current** (Tc = 25C) Peak Emitter Current** Maximum Collector Dissipation (Tc = 25C, Tj 150C) Mounting Torque, M5 Main Terminal Mounting Torque, M6 Mounting Weight Isolation Voltage (Main Terminal to Baseplate, AC 1 min.) Symbol Tj Tstg VCES VGES IC ICM IE IEM Pc - - - Viso CM100DU-24H -40 to 150 -40 to 125 1200 20 100 200* 100 200* 600 31 40 310 2500 Units C C Volts Volts Amperes Amperes Amperes Amperes Watts in-lb in-lb Grams Volts * Pulse width and repetition rate should be such that the device junction temperature (Tj) does not exceed Tj(max) rating. **Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). Static Electrical Characteristics, Tj = 25 C unless otherwise specified Characteristics Collector-Cutoff Current Gate Leakage Voltage Gate-Emitter Threshold Voltage Collector-Emitter Saturation Voltage Symbol ICES IGES VGE(th) VCE(sat) QG VEC Test Conditions VCE = VCES, VGE = 0V VGE = VGES, VCE = 0V IC = 10mA, VCE = 10V IC = 100A, VGE = 15V, Tj = 25C IC = 100A, VGE = 15V, Tj = 125C Total Gate Charge Emitter-Collector Voltage** VCC = 600V, IC = 100A, VGE = 15V IE = 100A, VGE = 0V Min. - - 4.5 - - - - Typ. - - 6 2.9 2.85 375 - Max. 1 0.5 7.5 3.7 - - 3.2 Units mA A Volts Volts Volts nC Volts **Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). Dynamic Electrical Characteristics, Tj = 25 C unless otherwise specified Characteristics Input Capacitance Output Capacitance Reverse Transfer Capacitance Resistive Load Switch Times Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Symbol Cies Coes Cres td(on) tr td(off) tf trr Qrr VCC = 600V, IC = 100A, VGE1 = VGE2 = 15V, RG = 3.1 , Resistive Load Switching Operation IE = 100A, diE/dt = -200A/s IE = 100A, diE/dt = -200A/s VCE = 10V, VGE = 0V Test Conditions Min. - - - - - - - - - Typ. - - - - - - - - 0.55 Max. 15 5 3 100 200 300 350 300 - Units nf nf nf ns ns ns ns ns C Diode Reverse Recovery Time** Diode Reverse Recovery Charge** **Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). Thermal and Mechanical Characteristics, Tj = 25 C unless otherwise specified Characteristics Thermal Resistance, Junction to Case Thermal Resistance, Junction to Case Contact Thermal Resistance Symbol Rth(j-c)Q Rth(j-c)D Rth(c-f) Test Conditions Per IGBT 1/2 Module Per FWDi 1/2 Module Per Module, Thermal Grease Applied Min. - - - Typ. - - 0.035 Max. 0.19 0.35 - Units C/W C/W C/W 50 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM100DU-24H Dual IGBTMODTM U-Series Module 100 Amperes/1200 Volts OUTPUT CHARACTERISTICS (TYPICAL) TRANSFER CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) 200 COLLECTOR CURRENT, IC, (AMPERES) VGE = 20V 160 120 160 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) Tj = 25oC 200 15 COLLECTOR CURRENT, IC, (AMPERES) 5 VCE = 10V Tj = 25C Tj = 125C VGE = 15V Tj = 25C Tj = 125C 12 20 4 3 2 1 11 120 10 80 9 80 40 0 40 8 0 0 2 4 6 8 10 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) 0 0 4 8 12 16 20 0 40 80 120 160 200 GATE-EMITTER VOLTAGE, VGE, (VOLTS) COLLECTOR-CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) CAPACITANCE VS. VCE (TYPICAL) 10 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) 103 Tj = 25C 102 Tj = 25C CAPACITANCE, Cies, Coes, Cres, (nF) VGE = 0V f = 1MHz 8 IC = 100A IC = 200A EMITTER CURRENT, IE, (AMPERES) 101 6 4 2 Cies 102 Coes 100 Cres IC = 40A 0 0 4 8 12 16 20 GATE-EMITTER VOLTAGE, VGE, (VOLTS) 101 1.0 1.5 2.0 2.5 3.0 3.5 4.0 10-1 10-1 100 101 102 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) di/dt = -200A/sec Tj = 25C REVERSE RECOVERY CURRENT, Irr, (AMPERES) GATE CHARGE, VGE 103 VCC = 600V VGE = 15V RG = 3.1 Tj = 125C td(off) tf REVERSE RECOVERY TIME, trr, (ns) 103 102 20 GATE-EMITTER VOLTAGE, VGE, (VOLTS) IC = 100A 16 12 8 4 SWITCHING TIME, (ns) VCC = 400V VCC = 600V 102 td(on) trr 102 Irr 101 101 tr 100 100 101 COLLECTOR CURRENT, IC, (AMPERES) 102 101 100 101 EMITTER CURRENT, IE, (AMPERES) 100 102 0 0 100 200 300 400 500 GATE CHARGE, QG, (nC) 51 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM100DU-24H Dual IGBTMODTM U-Series Module 100 Amperes/1200 Volts NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c) Zth = Rth * (NORMALIZED VALUE) 10-3 101 10-2 10-1 100 101 NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c) Zth = Rth * (NORMALIZED VALUE) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS ( IGBT) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi) 10-3 101 10-2 10-1 100 101 100 Single Pulse TC = 25C Per Unit Base = Rth(j-c) = 0.19C/W 100 Single Pulse TC = 25C Per Unit Base = Rth(j-c) = 0.35C/W 10-1 10-1 10-1 10-1 10-2 10-2 10-2 10-2 10-3 10-5 TIME, (s) 10-4 10-3 10-3 10-3 10-5 TIME, (s) 10-4 10-3 10-3 52 |
Price & Availability of CM100DU-24H
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |